{"product_id":"leo-xhs10000-self-priming-centrifugal-pump-7-5kw-10hp-415v-3-3-semi-open-impeller","title":"LEO XHS10000 Self-Priming Centrifugal Pump 7.5kW \/ 10HP, 415V, 3\" × 3\", Semi-Open Impeller","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eLEO XHS10000 Self-Priming Centrifugal Pump – 7.5 kW \/ 10 HP\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLEO XHS10000 Self-Priming Centrifugal Pump\u003c\/strong\u003e is a three-phase industrial pumping solution designed for high-volume water transfer, agricultural irrigation, drainage, construction sites and wastewater handling. Featuring a \u003cstrong\u003esemi-open impeller\u003c\/strong\u003e, a treated cast-iron pump body and an AISI 304 stainless-steel shaft, it is designed for demanding pumping applications where reliable hydraulic performance and practical maintenance are important.\u003c\/p\u003e\n\u003cp\u003ePowered by a \u003cstrong\u003e7.5 kW (10 HP) motor\u003c\/strong\u003e, the XHS10000 is specified for a flow range of approximately \u003cstrong\u003e83–1,660 litres per minute\u003c\/strong\u003e and a corresponding hydraulic head range of approximately \u003cstrong\u003e33–10 metres\u003c\/strong\u003e. Actual flow and head depend on the operating point, pipework, suction conditions and total system resistance.\u003c\/p\u003e\n\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial pumping capacity:\u003c\/strong\u003e Designed for high-volume water transfer and suitable wastewater-handling applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming design:\u003c\/strong\u003e Supports suction-lift operation within the specified installation limits; initial filling and priming procedures must follow the manufacturer's instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-open impeller:\u003c\/strong\u003e Suitable for certain liquids containing small solid particles and short fibres, subject to the pump's permitted particle size and fluid conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty construction:\u003c\/strong\u003e Cast-iron pump body and support with special anti-rust treatment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-resistant shaft:\u003c\/strong\u003e AISI 304 stainless-steel shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-phase electric motor:\u003c\/strong\u003e Rated at 7.5 kW \/ 10 HP; the linked product specification identifies a 415 V, 50 Hz supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor protection:\u003c\/strong\u003e Class F insulation and IPX4 enclosure protection, as specified for the series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServiceability:\u003c\/strong\u003e Designed for maintenance access and routine inspection of pump and motor components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLEO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eXHS10000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eSelf-priming centrifugal pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpeller type\u003c\/td\u003e\n\u003ctd\u003eSemi-open impeller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e7.5 kW \/ 10 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical phase\u003c\/td\u003e\n\u003ctd\u003eThree-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e415 V AC, as stated on the supplied product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply frequency\u003c\/td\u003e\n\u003ctd\u003e50 Hz, as stated on the supplied product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated connection size\u003c\/td\u003e\n\u003ctd\u003e3 inch × 3 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction connection\u003c\/td\u003e\n\u003ctd\u003e3 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDischarge connection\u003c\/td\u003e\n\u003ctd\u003e3 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListed flow range\u003c\/td\u003e\n\u003ctd\u003eApproximately 83–1,660 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquivalent flow range\u003c\/td\u003e\n\u003ctd\u003eApproximately 4.98–99.6 m³\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListed hydraulic head range\u003c\/td\u003e\n\u003ctd\u003eApproximately 33–10 m, depending on flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum suction lift\u003c\/td\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum liquid temperature\u003c\/td\u003e\n\u003ctd\u003e60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor insulation class\u003c\/td\u003e\n\u003ctd\u003eF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor enclosure protection\u003c\/td\u003e\n\u003ctd\u003eIPX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor winding\u003c\/td\u003e\n\u003ctd\u003eCopper winding, as specified for the series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing specification\u003c\/td\u003e\n\u003ctd\u003eLow-noise, long-life bearing design; exact bearing type not specified for this model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump body\u003c\/td\u003e\n\u003ctd\u003eCast iron with special anti-rust treatment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation orientation\u003c\/td\u003e\n\u003ctd\u003eHorizontal pump-and-motor assembly, as illustrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExplosion-proof certification\u003c\/td\u003e\n\u003ctd\u003eNot specified; the manufacturer states the series is unsuitable for applications requiring explosion-proof equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHydraulic Performance Data\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer's XHS-series performance table provides the following head values for the XHS10000 model. Flow values are converted from cubic metres per hour to litres per minute using 1 m³\/h = 16.667 L\/min.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow (m³\/h)\u003c\/th\u003e\n\u003cth\u003eApprox. Flow (L\/min)\u003c\/th\u003e\n\u003cth\u003eHead (m)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e167\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e333\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e417\u003c\/td\u003e\n\u003ctd\u003e31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003ctd\u003e31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e583\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e667\u003c\/td\u003e\n\u003ctd\u003e29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003ctd\u003e750\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e833\u003c\/td\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e1,000\u003c\/td\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003ctd\u003e1,083\u003c\/td\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e1,167\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003ctd\u003e1,333\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003ctd\u003e1,500\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003ctd\u003e1,667\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance note:\u003c\/strong\u003e The table above reproduces the published flow\/head points with rounded flow conversions. The retailer lists the maximum flow as 1,660 L\/min. The zero-flow head is a published performance-table value, not a recommended continuous operating condition. Select the pump using the manufacturer's complete curve and the required system duty point.\u003c\/p\u003e\n\u003ch3\u003eConstruction Materials\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003ePublished material\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump body\u003c\/td\u003e\n\u003ctd\u003eHT200 cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump support\u003c\/td\u003e\n\u003ctd\u003eHT200 cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpeller\u003c\/td\u003e\n\u003ctd\u003eHT200 cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet flange\u003c\/td\u003e\n\u003ctd\u003eHT200 cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrain flange\u003c\/td\u003e\n\u003ctd\u003eHT200 cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrain gasket\u003c\/td\u003e\n\u003ctd\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet check valve\u003c\/td\u003e\n\u003ctd\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet gasket\u003c\/td\u003e\n\u003ctd\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eO-ring seal\u003c\/td\u003e\n\u003ctd\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical seal\u003c\/td\u003e\n\u003ctd\u003eMaterial not specified in the supplied table\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil seal\u003c\/td\u003e\n\u003ctd\u003eMaterial not specified in the supplied table\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump shaft\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan\u003c\/td\u003e\n\u003ctd\u003ePP-GF30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear cover\u003c\/td\u003e\n\u003ctd\u003eHT200 \/ ADC12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor cover box\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor brace\u003c\/td\u003e\n\u003ctd\u003eHT200 \/ PA6-GF25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMaterial designations are reproduced from the supplied series materials table. Confirm component-specific materials with the manufacturer if chemical compatibility or a regulated application is involved.\u003c\/p\u003e\n\u003ch3\u003eDimensions and Packaging\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDimension \/ item\u003c\/th\u003e\n\u003cth\u003ePublished value\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction and discharge nominal sizes\u003c\/td\u003e\n\u003ctd\u003e3 inch \/ 3 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall pump-and-motor length (L)\u003c\/td\u003e\n\u003ctd\u003e694 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimension L1\u003c\/td\u003e\n\u003ctd\u003e185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth (W)\u003c\/td\u003e\n\u003ctd\u003e315.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimension W1\u003c\/td\u003e\n\u003ctd\u003e230 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight (H)\u003c\/td\u003e\n\u003ctd\u003e472 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimension H1\u003c\/td\u003e\n\u003ctd\u003e305 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e766 × 360 × 622 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging gross weight\u003c\/td\u003e\n\u003ctd\u003e105 kg, as listed in the series packaging table for XHS10000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are taken from the shared XHS-series dimensional table; packaging measurements and gross weight should be reconfirmed before freight booking. Net product weight is not independently established by the supplied datasheet.\u003c\/p\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIndustrial water transfer and circulation\u003c\/li\u003e\n\u003cli\u003eAgricultural irrigation and drainage\u003c\/li\u003e\n\u003cli\u003eConstruction-site dewatering and water management\u003c\/li\u003e\n\u003cli\u003eWastewater and municipal drainage applications\u003c\/li\u003e\n\u003cli\u003eGreywater and sewage transfer where fluid conditions are compatible\u003c\/li\u003e\n\u003cli\u003eHandling liquids containing limited small solids, sediment or short fibres, within manufacturer-approved limits\u003c\/li\u003e\n\u003cli\u003eSuitable industrial and agricultural pumping installations using compatible hoses or rigid pipework\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and Operating Considerations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify the available electrical supply, motor nameplate, phase, frequency and overload protection before installation.\u003c\/li\u003e\n\u003cli\u003eFollow the manufacturer's priming procedure and do not assume the pump can run dry.\u003c\/li\u003e\n\u003cli\u003eKeep suction piping airtight and appropriately sized; excessive suction losses can reduce performance.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the 5 m listed suction lift or the 60°C maximum liquid temperature.\u003c\/li\u003e\n\u003cli\u003eCheck the actual flow\/head operating point against the pump curve before final selection.\u003c\/li\u003e\n\u003cli\u003eConfirm allowable solid size, fibre content, liquid chemistry and seal compatibility for the intended fluid.\u003c\/li\u003e\n\u003cli\u003eIPX4 is splash protection, not permission to submerge the motor.\u003c\/li\u003e\n\u003cli\u003eDo not use this pump in an area requiring explosion-proof equipment unless a separately certified configuration is confirmed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the pump for leakage and unusual vibration or noise.\u003c\/li\u003e\n\u003cli\u003eCheck suction connections for air ingress.\u003c\/li\u003e\n\u003cli\u003eInspect and clean the suction strainer, where fitted.\u003c\/li\u003e\n\u003cli\u003eCheck the impeller and internal passages for accumulated debris.\u003c\/li\u003e\n\u003cli\u003eInspect the mechanical seal, gaskets and pipe connections.\u003c\/li\u003e\n\u003cli\u003eCheck electrical terminals, motor temperature and phase balance in accordance with qualified electrical maintenance procedures.\u003c\/li\u003e\n\u003cli\u003eFollow the manufacturer's maintenance intervals and service instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Specification Notes\u003c\/h3\u003e\n\u003cp\u003eThe linked retailer specifies 415 V and 50 Hz. The supplied LEO datasheet confirms the XHS10000 motor rating as 7.5 kW \/ 10 HP and supplies the hydraulic performance table. The series datasheet lists maximum ambient temperature as +40°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFlow, head and suction performance depend on installation and operating conditions. The published maximum flow and maximum head are not simultaneous guaranteed duty-point values. Confirm the required duty point, electrical configuration, included accessories, warranty and delivery details with the supplier before purchase.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Anwar Corp","offers":[{"title":"Default Title","offer_id":46229509537971,"sku":"LEO-xhs10000","price":450000.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0567\/3808\/7091\/files\/TealIndustrialCentrifugalPumpAssembly.png?v=1792068776","url":"https:\/\/jodiabaazar.com\/products\/leo-xhs10000-self-priming-centrifugal-pump-7-5kw-10hp-415v-3-3-semi-open-impeller","provider":"JodiaBaAzar.com","version":"1.0","type":"link"}